Retirement villages

Leases of premises for units in a retirement village, which have a term in excess of 25 years, require the lodgment of a Memorandum with an annexed sketch plan setting out the location of the individual villa etc within the complex prior to lodgment of the lease.

The memorandum (and annexed plan) must comply with the following:

  • Schedule 4 of the Lodgment Rules.
  • The memorandum must include reference to the affected certificate of title.
  • All affected lot/plan numbers, within the current title boundaries must be shown on the plan.
  • The memorandum must describe the sites within the village on the plan. (Note: proposed future sites must not be included). The type and number of each site must be described in a schedule in the memorandum and be identical to those shown on the plan (i.e. Hostels 1-12, Apartments 1-12, Villas 1-12).
  • Any following Memorandum must include a plan and a schedule listing and identifying all letable premises within the Retirement Village.
  • The full name of the applicant and the number of pages in the memorandum must be stated.
  • The memorandum must be signed by the applicant or the applicant's representative.

Renumbering of the sites may be accepted in NSW LRS provided no leases have been registered over those sites.

The lease of the apartment/villa etc must clearly identify the site and be cross-referenced to the relevant plan annexed to the memorandum. The lease must specify all of the subject premises including any garage, carport, storage room etc. Where it is intended for the lease to include these structures they must also be identified in the plan annexed to the memorandum.

Service Status Update

Until December 2018, there will be planned outages for some NSW LRS systems while we undertake essential works. Where possible these works have been scheduled over weekends to minimise disruption to our customers.

Upcoming Outages:
Will be advised once confirmed.

To check on the status of our online services or to subscribe to our outage notifications, please visit our Service Status page.